Back

reviews

Estimated delivery 26 - 28 January

Everbuild Everflex 125 One Hour Caulk 300ml C3

Please select a size from above to proceed.
The item was added to the basket Click here to view basket.
View Full Product Details Checkout now

Description

Everflex 125 One Hour Caulk is a fast-drying flexible decorators’ filler and sealant that remains permanently flexible. Can be overpainted with most paint types or covered over with wallpaper; no sanding down required.

  • Fast-drying – can be overpainted in 1 hour
  • Easy water clean up
  • Excellent slump resistance
  • Permanently flexible
  • Can be used to fill damaged plaster
  • Certified to the European standard EN15651 for façade use internally in compliance with the Construction Product Regulation

PRODUCT DESCRIPTION:

EVERBUILD® EVERFLEX® 125 One Hour Caulk is a fast
drying flexible decorators filler and sealant which can
be overpainted with all paint types, or covered over
with wallpaper. No sanding down is required. Remains permanently flexible.

USES:

For sealing and filling cracks and gaps prior to decorating.
For use around skirting boards, ceiling cornices, window and door frames, stair treads and risings and fixtures adjoining walls.
Can be used to fill damage plaster.

APPLICATION INSTRUCTIONS

SUBSTRATE PREPARATION
All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Highly porous substrates such as new plaster should first be primed with a dilution of Caulk with water at a ratio of 1:2. Can be applied to slightly damp surfaces.

APPLICATION METHOD / TOOLS
Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45 degrees with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed. Smooth down within 20 minutes of application using a wetted spatula, piece of wood or wetted gloved finger. Care should be taken at this point not to saturate the surface as this will delay drying. Any excess sealant etc., can be removed using a sponge and warm water. Can be overpainted after 1 hour.

Reviews

Reviews (0)

There are no reviews submitted

Post your review

You must be logged in to submit review

RELATED PRODUCTS

You may also like

Sale

Customers Also Viewed
FREE DELIVERY to UK Mainland for orders over £100